Power consumption for server housing

Skip to main content
Du bist hier:
Drucken

Power consumption for server housing

Every server housing package includes a certain amount of power in watts. We measure the power consumption of your server continuously. Here you can find out where to see it and how we bill extra usage.

What is included?

The wattage stated in the package is the average power included in the price:

  • Tower / NAS Housing: 150 watts
  • 1U Housing: 150 watts
  • 2U Housing: 300 watts
  • 3U Housing: 350 watts
  • 4U Housing: 400 watts
  • 5U Housing: 500 watts
  • 1/4 Rack: 500 watts
  • 1/2 Rack: 1000 watts
  • 1/1 Rack: 2000 watts

Where can I see my consumption?

Log in at https://admin.firestorm.ch and open your server housing under Services. In the Strom (power) section you will see:

  • the current power in watts
  • the average of the current month next to the included power
  • the consumption of the month so far in kWh
  • the figures of the previous month and any extra usage

Under Statistik (statistics) you will find the history of the last months.

How is extra usage billed?

What counts is the average over the whole calendar month. Short peaks, for example at startup or under full load, do not matter as long as the monthly average stays within the included power.

The included amount of energy is the included power multiplied by the hours of the month. Anything above that costs CHF 0.28 per kWh incl. VAT. You will receive the invoice for it after the 5th of the following month. If your consumption stays within the included amount, there is no invoice.

An example

You have a 3U housing with 350 watts. A month with 30 days has 720 hours, so 252 kWh are included. If your server uses 400 watts on average, that is 288 kWh. The extra usage is 36 kWh, which makes CHF 10.08.

As a rule of thumb: 100 watts continuously above the included power add up to about 72 kWh, or about CHF 20 per month.

Switching the power on and off

In the Strom section you can switch your server yourself with Einschalten (on) and Ausschalten (off). This helps, for example, if it no longer responds.

Caution: Switching off cuts the power immediately, just like pulling the plug. If possible, shut down the server first, otherwise data may be lost.

Good to know

Related Post